What is the best way to clean a laptop?

Cleaning laptop keyboard

While power is still out of the laptop, with a clean, lint-free cloth with a fine new window. Avoid using bleach or other cleaning products commercials. Squirt the cleaner onto the cloth, not the real key. Wipe each key until nice and clean. Release the keys for about 20 minutes to dry before you are on the laptop.

Cleaning the screen

Which should be cleaned regularly every laptop LED. Airborne dirt, dust and all that is in the air can be pulled off the screen. Make sure the system is off. Use a damp, lint-free clean water, clean gently light particles from the surface. Do not use chemical type. If necessary, you can buy a cleaning kit LED monitor has a very delicate and cleaning cloth. It works on flat panel TVs and rear projection.

As you can see the hair and dirt into the holes on the bottom or side of the box and a laptop, you can be sure that there is more inside the cell. The only way to get around is to open the case. Try not to fly, starting from the outside world. This does not clog the inside of the box. All cases are to be transported easily separated. There are lots of little screws that hold the case together. It can be made of plastic or rubber caps for the screws on the display. Almost all laptops must be separated from the base.

Make sure the power cord and remove the battery before leaving. Remove the hard disk and put it in a safe place away from the road. Do not use a magnetic screwdriver or wireless devices. When the case is completely open, you'll see the dust bunnies "hiding in the vicinity of the radiator fan and the processor cooling portable hot. Remove the key pieces with tweezers. The air pressure works well in a box to the dust in and around the System Tray and keys. Do keep out of the bag upright when using compressed air. blow When the air tilts downward when it is used may become the air is a liquid. It ruins the components inside the laptop.

When assembling the laptop, you should use the right screws in place. Some screws are longer than others, and the cables must be connected, where they are original. Pay close attention to ribbon cable and connectors in particular. To use the keyboard and the mouse pad it. Make sure the corner or compression fittings are tight before the next step. You do not want to reopen the case of the laptop until it's time to clean again.

 After completion of the notebook is as good as new.